300-165出題範囲, 300-165初心者, 300-165試験対策書, 300-165試験概要, 300-165受験記対策

Ktestは、あなたの試験に合格する300-165の事実を学ぶために賢いと最速の方法です。最新のCiscoのCCNP Data Center認定資格300-165情報は、1つの単純な低価格のためのKtestからのすべての利用可能です – それは300-165のダンプとして取得するように簡単です。あなたは私たちからあなたのパッケージを購入したら、それらがリリースされたあなたは、更新プログラムを取得します – それらが提供されるとき、それは右、無料の300-165の質問の更新をです。無料300-165試験過去問よりも優れた100％はあなたが疑わしい材料を暗記するために、その力をダンプします。

CCNP Data Center 認定の取得を目指す受験者は、2017年7月3日まで、300-165 DCII または 642-997 DCUFI から、受験する試験を選択できます。

300-165 Implementing Cisco Data Center Infrastructure（DCII）試験は、CCNP Data Center 認定に関連する試験の 1 つです。関連資格はCCNP Data Centerです。試験時間は90 分です。問題数量は60 ～ 70 問です。試験言語は英語のみです。

Pearson VUE で申し込む

Ciscoの300-165認定試験を受けて300-165認証資格を取得したいですか。Ktestはあなたの成功を保証することができます。もちろん、試験の準備をするときに試験に関連する知識を学ぶのは必要です。なお、大切なのは、自分に相応しい効率的なツールを選択することです。Ktestの300-165問題集はあなたに合う最善の勉強法です。この高品質の問題集は信じられないほどの結果を見せることができます。自分が試験に合格できない心配があれば、はやくKtestのウェブサイトをクリックしてもっと多くの情報を読んでください。KtestのCiscoの300-165認定試験の合格率は100％になっています。不合格になる場合或いはCiscoの300-165問題集がどんな問題があれば、私たちは全額返金することを保証いたします。

IT夢を持っていたら、速くKtestに来ましょう。 Ktestにはすごいトレーニング即ち Ciscoの300-165試験参考書試験トレーニング資料があります。これはIT職員の皆が熱望しているものです。あなたが試験に合格することを助けられますから。Ktestの300-165試験参考書問題集を入手してから、非常に短い時間で試験に準備しても、あなたは順調に試験に合格することができます。

KtestのCiscoの300-165試験問題集はIT認証試験を受ける人々の必需品です。このトレーニング資料を持っていたら、試験のために充分の準備をすることができます。そうしたら、Implementing Cisco Data Center Infrastructure試験に受かる信心も持つようになります。KtestのCiscoの300-165試験問題集グ資料は特別に受験生を対象として研究されたものです。インターネットでこんな高品質の試験問題集を提供できるサイトはKtestだけです。CCNP Data Center認定資格300-165試験製品によって複雑さや難易度は異なります。Ktest高い品質の300-165試験の参考書を提供し、高い分数で300-165試験を通過できるを保障します。

Share some CCNP Data Center 300-165 exam questions and answers below.

Which statement about implementation of Cisco TrustSec on Cisco Nexus 5546 or 5548 switches are true? 

A. Cisco TrustSec support varies depending on Cisco Nexus 5500 Series Switch model. 

B. The hardware is not able to support MACsec switch-port-level encryption based on IEEE 802.1AE. 

C. The maximum number of RBACL TCAM user configurable entries is 128k. 

D. The SGT Exchange Protocol must use the management (mgmt 0) interface. 

Answer: B 

Which statement about RADIUS configuration distribution using Cisco Fabric Services on a Cisco Nexus 7000 Series Switch is true? 

A. Cisco Fabric Services does not distribute the RADIUS server group configuration or server and global keys. 

B. Enabling Cisco Fabric Services causes the existing RADIUS configuration on your Cisco NX-OS device to be immediately distributed. 

C. When the RADIUS configuration is being simultaneously changed on more than one device in a Cisco Fabric Services region, the most recent changes will take precedence. 

D. Only the Cisco NX-OS device with the lowest IP address in the Cisco Fabric Services region can lock the RADIUS configuration. 

Answer: A

By default it will take 10 seconds for authentication to fail due to an unresponsive RADIUS server before a Cisco Nexus series switch reverts to another RADIUS server or local authentication. What is one efficient way to improve the reaction time to a RADIUS server failure? 

A. Decrease the global RADIUS retransmission count to 1. 

B. Decrease the global RADIUS timeout interval to 5 seconds. 

C. Configure the RADIUS retransmission count and timeout interval per server, versus globally. D. Configure per server a test idle timer, along with a username and password. 

Answer: D

Which statement explains why a Cisco UCS 6200 Fabric Interconnect that is configured in end-host mode is beneficial to the unified fabric network? 

A. There is support for multiple (power of 2) uplinks. 

B. Upstream Layer 2 disjoint networks will remain separated. 

C. The 6200 can connect directly via vPC to a Layer 3 aggregation device. 

D. STP is not required on the uplink ports from the 6200. 

Answer: D

Which two statements about Cisco Nexus 7000 line cards are true? (Choose two.) 

A. M1, M2, and F1 cards are allowed in the same VDC. 

B. M line cards are service-oriented and likely face the access layer and provide Layer 2 connectivity. 

C. F line cards are performance-oriented and likely connect northbound to the core layer for Layer 3 connectivity. 

D. M line cards support Layer 2, Layer 3, and Layer 4 with large forwarding tables and a rich feature set. E. The F2 line card must reside in the admin VDC. 

Answer: A, D

Which statement about the Layer 3 card on the Cisco Nexus 5500 Series Switch is true? 

A. BGP support is not provided, but RIP, EIGRP, and OSPF support is provided. 

B. Up to two 4-port cards are supported with up to 160 Gb/s of Layer 3 forwarding capability. C. Up to 16 FEX connections are supported.

 D. Port channels cannot be configured as Layer 3 interfaces. 

Answer: C

Which statement about SNMP support on Cisco Nexus switches is true? 

A. Cisco NX-OS only supports SNMP over IPv4.

B. Cisco NX-OS supports one instance of the SNMP per VDC. 

C. SNMP is not VRF-aware. 

D. SNMP requires the LAN_ENTERPRISE_SERVICES_PKG license. 

E. Only users belonging to the network operator RBAC role can assign SNMP groups. 

Answer: B

Which GLBP load-balancing algorithm ensures that a client is always mapped to the same VMAC address? 

A. vmac-weighted 

B. dedicated-vmac-mode 

C. shortest-path and weighting 

D. host-dependent 

Answer: D

Which three items must be configured in the port profile client in Cisco UCS Manager? (Choose three.) 

A. port profile 

B. DVS C. data center 

D. folder E. vCenter IP address 

F. VM port group 

Answer: B, C, D

Topic 1, Data Center Infrastructure Maintenance, Management, and Operations 

Which statement about RADIUS configuration distribution using Cisco Fabric Services on a Cisco Nexus 7000 Series Switch is true? 

A. Cisco Fabric Services does not distribute the RADIUS server group configuration or server and global keys. 

B. Enabling Cisco Fabric Services causes the existing RADIUS configuration on your Cisco NX-OS device to be immediately distributed. 

C. When the RADIUS configuration is being simultaneously changed on more than one device in a Cisco Fabric Services region, the most recent changes will take precedence. 

D. Only the Cisco NX-OS device with the lowest IP address in the Cisco Fabric Services region can lock the RADIUS configuration. 

Answer: A 

By default it will take 10 seconds for authentication to fail due to an unresponsive RADIUS server before a Cisco Nexus series switch reverts to another RADIUS server or local authentication. What is one efficient way to improve the reaction time to a RADIUS server failure? 

A. Decrease the global RADIUS retransmission count to 1. 

B. Decrease the global RADIUS timeout interval to 5 seconds. 

C. Configure the RADIUS retransmission count and timeout interval per server, versus globally. 

D. Configure per server a test idle timer, along with a username and password. 

Answer: D 

Which statement explains why a Cisco UCS 6200 Fabric Interconnect that is configured in end-host mode is beneficial to the unified fabric network? 

A. There is support for multiple (power of 2) uplinks. 

B. Upstream Layer 2 disjoint networks will remain separated. 

C. The 6200 can connect directly via vPC to a Layer 3 aggregation device. 

D. STP is not required on the uplink ports from the 6200. 

Answer: D 

Which two statements about Cisco Nexus 7000 line cards are true? (Choose two.) 

A. M1, M2, and F1 cards are allowed in the same VDC. 

B. M line cards are service-oriented and likely face the access layer and provide Layer 2 connectivity. 

C. F line cards are performance-oriented and likely connect northbound to the core layer for Layer 3 connectivity. 

D. M line cards support Layer 2, Layer 3, and Layer 4 with large forwarding tables and a rich feature set. 

E. The F2 line card must reside in the admin VDC. 

Answer: A, D 

Which statement about the Layer 3 card on the Cisco Nexus 5500 Series Switch is true? 

A. BGP support is not provided, but RIP, EIGRP, and OSPF support is provided. 

B. Up to two 4-port cards are supported with up to 160 Gb/s of Layer 3 forwarding capability. 

C. Up to 16 FEX connections are supported. 

D. Port channels cannot be configured as Layer 3 interfaces. 

Answer: C 

Which statement about SNMP support on Cisco Nexus switches is true? 

A. Cisco NX-OS only supports SNMP over IPv4. 

B. Cisco NX-OS supports one instance of the SNMP per VDC. 

C. SNMP is not VRF-aware. 

D. SNMP requires the LAN_ENTERPRISE_SERVICES_PKG license. 

E. Only users belonging to the network operator RBAC role can assign SNMP groups. 

Answer: B 

Which GLBP load-balancing algorithm ensures that a client is always mapped to the same VMAC address? 

A. vmac-weighted 

B. dedicated-vmac-mode 

C. shortest-path and weighting 

D. host-dependent 

Answer: D 

Which three items must be configured in the port profile client in Cisco UCS Manager? (Choose three.) 

A. port profile 

B. DVS 

C. data center 

D. folder 

E. vCenter IP address 

F. VM port group 

Answer: B, C, D 

Refer to the command below. When configuring an SVS connection on the Cisco Nexus 5000 Series Switch, which device is being referenced as the remote IP address? 

nexus5500-2(config-svs-conn)# remote ip address 10.10.1.15 port 80 vrf management 

A. ESX or ESXi host 

B. vCenter 

C. vPC peer switch 

D. Cisco IMC management 

Answer: B 

On a Cisco Nexus 7000 Series router, which statement about HSRP and VRRP is true? 

A. When VDCs are in use, only VRRP is supported. 

B. HSRP and VRRP both use the same multicast IP address with different port numbers. 

C. HSRP has shorter default hold and hello times. 

D. The VRRP group IP address can be the same as the router-specific IP address. 

Answer: D 

Which protocol is the foundation for unified fabric as implemented in Cisco NX-OS? 

A. Fibre Channel 

B. Data Center Bridging 

C. Fibre Channel over Ethernet 

D. N proxy virtualization 

E. N Port identifier virtualization 

Answer: C 

Topic 2, Data Center Infrastructure Security 

Which statement about RBAC user roles on a Cisco Nexus switch is true? 

A. If you belong to multiple roles, you can execute only the commands that are permitted by both roles (logical AND). 

B. Access to a command takes priority over being denied access to a command. 

C. The predefined roles can only be changed by the network administrator (superuser). 

D. The default SAN administrator role restricts configuration to Fibre Channel interfaces. 

E. On a Cisco Nexus 7000 Series Switch, roles are shared between VDCs. 

Answer: B 

Which statement is true if password-strength checking is enabled? 

A. Short, easy-to-decipher passwords will be rejected. 

B. The strength of existing passwords will be checked. 

C. Special characters, such as the dollar sign ($) or the percent sign (%), will not be allowed. 

D. Passwords become case-sensitive. 

Answer: A 

When a local RBAC user account has the same name as a remote user account on an AAA server, what happens when a user with that name logs into a Cisco Nexus switch? 

A. The user roles from the remote AAA user account are applied, not the configured local user roles. 

B. All the roles are merged (logical OR). 

C. The user roles from the local user account are applied, not the remote AAA user roles. 

D. Only the roles that are defined on both accounts are merged (logical AND). 

Answer: C 

After enabling strong, reversible 128-bit Advanced Encryption Standard password type-6 encryption on a Cisco Nexus 7000, which command would convert existing plain or weakly encrypted passwords to type-6 encrypted passwords? 

A. switch# key config-key ascii 

B. switch(config)# feature password encryption aes 

C. switch# encryption re-encrypt obfuscated 

D. switch# encryption decrypt type6 

Answer: C 

Which two security features are only supported on the Cisco Nexus 7000 Series Switches? (Choose two.) 

A. IP source guard 

B. traffic storm control 

C. CoPP 

D. DHCP snooping 

E. Dynamic ARP Inspection 

F. NAC 

Answer: B, F 

Which statement about the implementation of Cisco TrustSec on Cisco Nexus 7000 Series Switches is true? 

A. While SGACL enforcement and SGT propagation are supported on the M and F modules, 802.1AE (MACsec) support is available only on the M module. 

B. SGT Exchange Protocol is required to propagate the SGTs across F modules that lack hardware support for Cisco TrustSec. 

C. AAA authentication and authorization is supported using TACACS or RADIUS to a Cisco Secure Access Control Server. 

D. Both Cisco TrustSec and 802.1X can be configured on an F or M module interface. 

Answer: A 

Which statement about implementation of Cisco TrustSec on Cisco Nexus 5546 or 5548 switches are true? 

A. Cisco TrustSec support varies depending on Cisco Nexus 5500 Series Switch model. 

B. The hardware is not able to support MACsec switch-port-level encryption based on IEEE 802.1AE. 

C. The maximum number of RBACL TCAM user configurable entries is 128k. 

D. The SGT Exchange Protocol must use the management (mgmt 0) interface. 

Answer: B 

In the dynamic vNIC creation wizard, why are choices for Protection important? 

A. They allow reserve vNICs to be allocated out of the spares pool. 

B. They enable hardware-based failover. 

C. They select the primary fabric association for dynamic vNICs. 

D. They allow dynamic vNICs to be reserved for fabric failover. 

Answer: C 

How is a dynamic vNIC allocated? 

A. Dynamic vNICs are assigned to VMs in vCenter. 

B. Dynamic vNICs can only be bound to the service profile through an updating template. 

C. Dynamic vNICs are bound directly to a service profile. 

D. Dynamic vNICs are assigned by binding a port profile to the service profile. 

Answer: C 

Which of the following Cisco Nexus features is best managed with DCNM-LAN? 

A. VSS 

B. Domain parameters 

C. Virtual switches 

D. AAA 

Answer: C 

Which Cisco Nexus feature is best managed with DCNM-SAN? 

A. VSS 

B. domain parameters 

C. virtual switches 

D. AAA 

Answer: B 

Which option is a restriction of the unified ports on the Cisco UCS 6200 Series Fabric Interconnect when connecting to the unified fabric network? 

A. Direct FC connections are not supported to Cisco MDS switches 

B. The FCoE or Fibre Channel port allocations must be contiguous on the 6200. 

C. 10-G Fibre Channel ports only use SFP+ interfaces. 

D. vPC is not supported on the Ethernet ports. 

Answer: B 

The Connectivity Management Processor monitors the active supervisor module on a Cisco Nexus 7000 switch and will reboot the device in the event of a lights-out management issue. However, which option includes features that provide similar benefits in the absence of the Connectivity Management Processor? 

A. high-availability functionality from features such as vPC and NSF 

B. traditional system connectivity models like SNMP, GUI, or SSH 

C. Cisco FabricPath 

D. VDC failover 

Answer: A